Our tips for a flawless installation
Welcome to our MAGIC ELEK installation guide tips section! We understand how important it is to get a flawless installation to get the most out of our innovative products.
In this section, we've put together some practical tips and tricks to help you achieve a simple and efficient installation. Whether you're a keen amateur or a seasoned DIY enthusiast, our step-by-step tips will guide you through the process.
Leave nothing to chance and discover our expert advice for a successful installation of your MAGIC ELEK products!
Measure
Measure the distance between the position of the equipment (TV, luminaire) and the socket before transferring the measurement to the cable, then cut to size.
Screw
When inserting the ultra-flat electrical cable into the connector block: tighten the screws all the way so that they pierce the cable completely and ensure the electrical current flows.
Fold
You can fold the cable in two to change its direction, depending on where your equipment and the socket are located.
Test
Test the complete installation before sticking it to the wall.
Check
Use a spirit level when positioning the connectors to make sure the installation is perfectly straight.
Finish
If you don't want to repaint a whole wall: once the cable is installed, apply tape on each side and paint the cable in the colour of your wall. You can also conceal the cable with the white self-adhesive wallpaper provided. And for an even more perfect result, you can paint that self-adhesive wallpaper in any colour you like.
MAGIC ELEK installations
MAGIC ELEK videos
4 videosMake your cables disappear today
Choose the pack that matches your installation and fit your invisible cable in minutes, with no chasing and no drilling.
Discover our packs→